
Quite often pushrods can be repaired fairly easy. Most of the time if a pushrod needs to be repaired; the pushrod tip is the area in need of replacement. Our manufacturing facility is equipped with the proper tools to do this job efficiently. Another request we often can accomplish is to shorten pushrods. This procedure is much more time consuming but can still be cost effective in some cases. Usually the most a pushrod can be shortened is approximately -.150 or one hundred fifty thousandths. This is due to ream depth inside the tube.
What ever you are trying to accomplish, please call with any questions BEFORE you send the pushrods back to us. Calling first could eliminate a lot of frustration and unnecessary shipping expense.
- We only repair pushrods that we have manufactured, we will not repair or modify a Series 1,2 or 4.
- We do not warranty repaired parts.
- Sometimes parts should just be cycled out.
- It usually will take 1 week to repair pushrods.
Labor PART # | Non-Guide Plate Use |
---|---|
701 | Shorten Pushrod |
702 | Replace Pushrod End |
703 | Straighten Pushrod |
704 | Shorten, Straighten & Replace One End |