PUSHRODS SERIES 1
- Mild Performance
- Mainly used in small engines from Carts to Volkswagens with low valve spring pressures and up to 250 hp.
- Provides 140,000 psi tensile strength
- 4130/4135 chromoly tubing is much stronger then a stock pushrod.
- Not recommended for use with hardened guide plates or roller camshafts.
Diameter Sizes: 3/16″ | 1/4″ | 5/16″ | 3/8″
Straight tube, any length
Series 1 - Mild Performance - 4130/4135 Normalized
PUSHRODS SERIES 2
- Mild Performance
- Mainly used to replace factory style guide plate pushrods for many different applications.
- Provides approximately 150,000 psi tensile strength
- 4130/4135 chromoly tubing is much stronger then a stock pushrod.
- MeloniteTM processed for excellent wear resistance/durability.
Diameter Sizes: 5/16″ | 3/8″
Straight tube, any length
Series 2 - Mild Performance - 4130/4135 Normalized
PUSHRODS SERIES 3​
- Semi to High Performance
- Used for multiple applications such as Sportsman, Marine, LS and Factory Performance engines.
- LS Series with Hydraulic Roller Cam
- Provides approximately 170,000 psi tensile strength
- Hard Drawn 4130/4135 seamless chromoly tubing, the highest quality available from mills. Originally formulated for aerospace/aircraft use.
- Shaft or pedestal style rockerarms should be used in conjunction with this series of pushrod because we do not case harden the tube for guide plate us.
Diameter Sizes: 5/16″ | 11/32″ | 3/8″ | 7/16″ | 1/2″ | 3/8″ | 9/16″
Straight tube or tapered, any length or variation of taper.
Series 3 - Medium to High Performance - 4130/4135 Hard Drawn
PUSHRODS SERIES 4
- Mid to High Performance
- Used with any guide plate pushrod engine.
- Provides approximately 180,000 psi tensile strength
- Hard Drawn 4130/4135 seamless chromoly tubing, the highest quality available from mills. Originally formulated for aerospace/aircraft use.
- MeloniteTM processed for excellent wear resistance/durability.
Diameter Sizes: 5/16″ | 11/32″ | 3/8″ | 7/16″
Straight tube, any length
Series 4 - Medium to High Performance - 4130/4135 Hard Drawn
PUSHRODS SERIES 5
The strongest most durable chromoly pushrod ever produced in the world.
- Mainly used in Cup, Top Fuel, Pro Stock, Pro Modified, Blown Alcohol, Pulling Tractor, Sprint Car, Offshore Marine, and LS Series.
- Normally Aspirated, Blown, Turbo Charged or Nitrous
- Utilizing 4130/4135 chromoly tubing and with proprietary head treating techniques we are able to achieve a 275,000 psi tensile strength from the tubing without causing it to become brittle.
- Variety of tips available in 8620, H-13 or Copper Alloy Insert Cup.
- Individually hand crafted and inspected
- Shaft or pedestal style rockerarms should be used in conjunction with this series of pushrod because we do not case harden the tube for guide plate use.
Diameter Sizes: 5/16″ | 11/32″ | 3/8″ | 7/16″ | 1/2″ | 9/16″ | 5/8″ | 3/4″
Straight tube or tapered, any length or variation of taper.
Series 5 - Maximum Performance - 4130/4135 Salt Heat Treated to 275,000 psi Tensil
Tool Steel
S-7 tool steel 3 piece pushrods are the World Champions Choice, they are the strongest pushrod ever produced.
- S-7 high speed tool steel is an extremely dense material which is normally used to produce chisels and hammers; this creates a stiffer and stronger column.
- Mainly used in Top Fuel, A Fuel, Blown Alcohol, Pro Modified, Nostalgia, Pulling Tractor.
- Hemi style or non-pushrod oiling applications.
- Extreme cylinder and spring pressures.
- Up to 12,500 RPM
- Up to 12,000 HP
- Variety of tips available in 8620 or H-13
- Individually hand crafted and inspected.
- Verification sheet sent with each order.
Diameter Sizes: 3/8″ | 7/16″ | 1/2″ | 9/16″
Straight tube or tapered, any length or variation of taper.
Tool Steel Solid Bar Pushrods - Top Fuel, A Fuel, Blown Alcohol, Pro Modified, Nostalgia
PUSHRODS SERIES 1
- Mild Performance
- Mainly used in small engines from Carts to Volkswagens with low valve spring pressures and up to 250 hp.
- Provides 140,000 psi tensile strength
- 4130/4135 chromoly tubing is much stronger then a stock pushrod.
- Not recommended for use with hardened guide plates or roller camshafts.
PUSHRODS SERIES 2
- Mild Performance
- Mainly used to replace factory style guide plate pushrods for many different applications.
- Provides approximately 150,000 psi tensile strength
- 4130/4135 chromoly tubing is much stronger then a stock pushrod.
- MeloniteTM processed for excellent wear resistance/durability.
PUSHRODS SERIES 3​
- Semi to High Performance
- Used for multiple applications such as Sportsman, Marine, LS and Factory Performance engines.
- LS Series with Hydraulic Roller Cam
- Provides approximately 170,000 psi tensile strength
- Hard Drawn 4130/4135 seamless chromoly tubing, the highest quality available from mills. Originally formulated for aerospace/aircraft use.
- Shaft or pedestal style rockerarms should be used in conjunction with this series of pushrod because we do not case harden the tube for guide plate us.
PUSHRODS SERIES 4
- Semi to High Performance
- Used with any guide plate pushrod engine.
- Provides approximately 180,000 psi tensile strength
- Hard Drawn 4130/4135 seamless chromoly tubing, the highest quality available from mills. Originally formulated for aerospace/aircraft use.
- MeloniteTM processed for excellent wear resistance/durability.
PUSHRODS SERIES 5
- Mainly used in Cup, Top Fuel, Pro Stock, Pro Modified, Blown Alcohol, Pulling Tractor, Sprint Car, Offshore Marine, and LS Series.
- Normally Aspirated, Blown, Turbo Charged or Nitrous
- Utilizing 4130/4135 chromoly tubing and with proprietary head treating techniques we are able to achieve a 275,000 psi tensile strength from the tubing without causing it to become brittle.
- Proprietary heat treated to create a tube that has straightness memory with a hardness of 42 to 46 Rockwell.
- Variety of tips available in 8620, H-13 or Copper Alloy Insert Cup.
- Individually hand crafted and inspected
- Shaft or pedestal style rockerarms should be used in conjunction with this series of pushrod because we do not case harden the tube for guide plate use.
Tool Steel
- S-7 high speed tool steel is an extremely dense material which is normally used to produce chisels and hammers; this creates a stiffer and stronger column.
- Mainly used in Top Fuel, A Fuel, Blown Alcohol, Pro Modified, Nostalgia, Pulling Tractor.
- Hemi style or non-pushrod oiling applications.
- Extreme cylinder and spring pressures.
- Up to 12,500 RPM
- Up to 12,000 HP
- Proprietary heat treated to a hardness of 53 to 56 Rockwell.
- Variety of tips available in 8620 or H-13
- Individually hand crafted and inspected.
- Verification sheet sent with each order.
- Variety of tips available in 8620 OR H-13
